Experience the ultimate solution for handling delicate materials with the unbeatable combination of our top-of-the-line Vacuum Lifter and our latest Seal technology.
£270.00 + VAT
Inc. VAT: £324.00
Grabo Pro
The GRABO Pro is the next generation of vacuum lifter tools and is the newest addition to the GRABO range. Ergonomically designed to provide better grip and less fatigue when moving heavy objects, the GRABO Pro comes equipped with a smart digital pressure sensor, digital display and smart settings for both weight and pressure.
Brace Seal
The Brace Seal is a new replacement seal for the GRABO, specifically designed for very thin or fragile materials. Swapping out a Standard Seal with a Brace Seal is a breeze - no adhesives needed! It takes just a few seconds to make the replacement and enjoy the benefits of the Brace Seal on any GRABO model.
| Model/SKU | GRABO PRO-LIFTER 20 / GRAB300 |
| Battery | 14.8VDC 2600mAh Li-ion |
| Rated Power | 16W |
| Charger Input Voltage | 100-240VAC 50/60Hz(Not Included) approx. 1500 on/off cycles |
| Battery Charging Time | ~2hrs |
| Non-Stop Running Time (Full Charge) | 1.5hrs |
| Running Cycles (On Full Charge) | 900 ON-OFF cycles of 10 seconds |
| Stand-by Mode (Charge Hold) | 30 days |
| Maximum Vacuum Rate: | -0.7 bar (-70 kPA) |
| Pump Service Life | 100000+ ON-OFF cycles / 800+ hrs continuous |
| Rated Air Flow | 0.7cfm (20 L/min) |
| Maximum Vacuum Rate | 11.6Psi (0.8 Bar, 80 kPa) |
| Maximum Lifting Capacity | 170 kg (375Lbs) |
| L x W x H | 300 x 184 x 121 mm (11.77 x 7.22 x 4.76”) |
| Net Weight (With Battery) | 1.5 kg (3.2Lbs) |
| Working Temperature | 0°~60 °C (32°F~140°F) |
| Applicable Surface Type | Peak/valley heights less than 3mm (0.1”), arc less than 5° |
| Additional Features | Pump stops automatically at maximum vacuum rate ( 11.6Psi / 0.8 Bar ) |
To view our Grabo Warranty, go to here.
