Foam-Rubber seal

With continuous usages the seals wear out. When the GRABO seal finally wears out, the lifting capacity diminishes. In this case you can replace the worn seal by hand within seconds.
Spare ones are available from many of our dealers. This patented high friction foam-rubber seal fits all GRABO models.


Black foam seal
MaterialSBR rubber foam sponge
L x W x H293 x 175 x 19 mm (11.5 x 6.9 x 0.7")
Density170 kg/m^3 (10.6 Lb/cft)
Hardness, Shore C~10 +/-2
Tearing Pressure1800 Psi (126 kg/cm^2)
Compression to 25% size at8.5 Psi (6000 kg/m^2)
Water Absorption, %<=5
Shrinkage at 160F (70C) for 24 hrs, %<=20
Recommended Storage TemperatureRoom temperature
Red seal
MaterialSilicon Foam
Density650 kg/m^3 (40.5 Lb/cft)
Hardness, Shore C55 +/-5
Water Absorption, %<=4
Recommended Storage TemperatureRoom temperature

Change the way you lift

Be part of the revolution. Make heavy lifting safer and easier by grabbing yourself a GRABO.
The GRABO is not designed or intended for climbing or to support a person’s weight. Using this product for climbing or any other unintended purpose may result in injury or death.
Copyright © Exordia Global Ltd. GRABO is a trademark of Nemo Powertools Ltd.
Privacy Policy | Cookie Policy | Terms and Conditions
linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram